AirFit P30i Tube-up Nasal Pillows CPAP mask | ResMed
AirFit P30i

AirFit P30i

Tube-up nasal pillows CPAP mask

AirFit P30i

Tube-up nasal pillows CPAP mask

  • Preferred nearly 2 to 1 over DreamWear™ gel pillows1
  • Top-of-head tube design gives patients freedom to sleep any way they want
  • Has the fewest SKUs among competitor masks*
  • Designed to work with a ResMed AirFit™ N30i cushion

close-icon

A more natural sleep experience

ResMed AirFit™ P30i is designed to keep air tubing out of the way so patients can sleep comfortably in their favorite position. It also features a nasal pillows cushion with ResMed QuietAir™ vent technology, which makes it 80% quieter than the market-leading mask.2,3†

A more natural sleep experience

ResMed AirFit™ P30i is designed to keep air tubing out of the way so patients can sleep comfortably in their favorite position. It also features a nasal pillows cushion with ResMed QuietAir™ vent technology, which makes it 80% quieter than the market-leading mask.2,3†

First-time fit

The AirFit P30i SpringFit frame comes in only two sizes and automatically adjusts to different facial profiles for a broad range of fit. With an accurate fit the first time around, you can feel more confident during patient setups!

First-time fit

The AirFit P30i SpringFit frame comes in only two sizes and automatically adjusts to different facial profiles for a broad range of fit. With an accurate fit the first time around, you can feel more confident during patient setups!

Simplified ordering and inventory management

Fit your patients with one of two AirFit P30i starter packs. With limited mask-to-cushion configurations, initial ordering and resupply are streamlined. Patients can try out multiple nasal pillows cushions and pick the one that feels most comfortable. The Standard Starter Pack includes three nasal pillows cushion sizes: Small, Medium and Large. The Small Starter Pack includes two nasal pillows cushion sizes: Small and Medium.

Simplified ordering and inventory management

Fit your patients with one of two AirFit P30i starter packs. With limited mask-to-cushion configurations, initial ordering and resupply are streamlined. Patients can try out multiple nasal pillows cushions and pick the one that feels most comfortable. The Standard Starter Pack includes three nasal pillows cushion sizes: Small, Medium and Large. The Small Starter Pack includes two nasal pillows cushion sizes: Small and Medium.

Explore

left-rotate right-rotate

Support

Choosing the right frame size

  1. The AirFit P30i SpringFit frame comes in only two sizes and is designed for a broad range of fit. For male patients, start with the Standard frame. For female patients, start with the Small frame. 
  2. If you try the Small frame, and it falls forward on your patient’s head or rests too close to the patient's eyes, size up to the Standard frame for a better fit.
  3. If the Standard frame falls back over your patient’s head or sits too close to their ears, try the Small frame for a more comfortable fit.

Mask fitting

  1. Bring the mask above your patient's head and then down over their face while ensuring the elbow is centered on top of the head. 
  2. Place the headgear behind the patient’s head and align the nasal pillows into your nostrils.
  3. Adjust the headgear by tightening or loosening it as appropriate until the mask and cushion are comfortably in place.
  4. Squeeze the side buttons on both sides of the mask elbow to quickly and easily disconnect it from the top of the frame, and then attach it to the patient’s air tubing.
  5. Reconnect the mask elbow (with the air tubing connected) to the top of the frame.

Getting started with therapy
Here are some links to help your patients get on the right track with the sleep therapy.

Your therapy basics

The how, what, where and why

The benefits of therapy

What does therapy do for you

Think positive

Some helpful tips

Mask assembly/reassembly

  1. Ensure all the mask components and parts are together to begin.
  2. Connect the mask elbow to the frame.
  3. Thread the left end of the headgear into the left side of the frame and fasten the tab. Next, thread the right end of the headgear into the right side of the frame and fasten the tab.
  4. Align the arrow on the nasal pillows cushion to the arrow on the frame and connect them together. Then, connect the remaining end of the nasal pillows cushion and frame together with the ResMed logo facing the right way up through the headgear.

Managing mask leak

  1. Locate where the air is escaping from on the mask, which is typically above or below the nasal pillows cushion.
  2. If air leaks from the side or top of the nasal pillows cushion, adjust the mask fitting to improve the seal.
  3. Gently pull the nasal pillows cushion out from under the nose and away from the face. Then, let the mask reseal itself.
  4. Adjust the headgear as needed to achieve a more secure seal. Then, check to ensure the frame is secure and that the mask elbow and tubing are not pulling on the mask.

Daily cleaning

  1. Take the nasal pillows cushion off of the frame as per disassembly instructions.
  2. Soak the nasal pillows cushion in warm water and a mild liquid detergent.
  3. Clean the nasal pillows cushion and its vent holes inside and out with a soft bristle brush.
  4. Rinse the nasal pillows cushion thoroughly under running tap water.
  5. Gently shake it to remove any excess water. 
  6. Leave the nasal pillows cushion to air dry away from direct sunlight.

Weekly cleaning

  1. Disassemble the mask into its components as per disassembly instructions.
  2. Soak each of the mask components (headgear, elbow and frame) in warm water and a mild liquid detergent.
  3. Gently hand-wash the headgear. Clean the mask elbow and frame with a soft bristle brush.
  4. Rinse each of the mask components thoroughly under running tap water.
  5. Squeeze the headgear and the sleeves on the frame with a clean towel to remove excess water.
  6. Leave each of the mask components to air dry away from direct sunlight.

Mask disassembly

  1. Ensure the mask is disconnected from the CPAP device.
  2. Pull the nasal pillows cushion out from one end of the frame. Repeat on the other end.
  3. Unfasten the headgear tab from one side and pull it out of the frame. Repeat on the other side.
  4. Squeeze the side buttons on the mask elbow and pull up to quickly and easily release it from the frame.

Mask inspection

  1. To maintain optimum therapy performance, your patient should check their mask regularly for signs of damage and deterioration (e.g. cracking, crazing, tears, etc.).
  2. The patient should check each mask component as its cleaned.
  3. Inspect the headgear, frame, elbow, cushion and air tubing.
  4. Your patient should replace mask components regularly to help prevent mask deterioration from occurring and help optimize mask performance.
  5. Recommended resupply schedule:
    - Nasal pillows cushion: 2 x per month
    - Air tubing: every 3 months
    - Headgear: every 6 months
    Note: Replacement cycles may vary depending on your patient's insurance coverage. 
  6. The QuietAir vent† can be removed to allow inspection of the vent holes.
  7. A slight discoloration of the silicone cushion components may occur and is acceptable.
  8. If any mask component appears damaged or deteriorated, it should be discarded and replaced.
  9. Patients should follow up with their equipment provider if they have questions.

 

Vent connection

  1. To disconnect the vent, gently pull the nasal pillows piece away and slide the vent out.
  2. To reconnect the vent, align the notch on the nasal pillows piece with the groove on the vent, and then gently pull the nasal pillows piece over the vent.

Getting started with therapy
Here are some links to help your patients get on the right track with the sleep therapy.

Your therapy basics

The how, what, where and why

The benefits of therapy

What does therapy do for you

Think positive

Some helpful tips

Our ecosystem
Individual answers. Collective solutions.

At ResMed, innovation isn’t just an individual idea, it’s an integrated practice. Our innovative products are designed to work together to provide a more powerful solution for you and your patients.

References

* AirFit P30i has fewer SKUs than Philips™ Respironics DreamWear gel pillows and Fisher & Paykel™ Brevida nasal pillows masks as of April 15, 2019

ResMed QuietAir™ diffused venting technology is a feature available in AirFit P30i retail mask systems only. This feature is not available in AirFit P30i sleep lab (SLM) mask systems

Combined responses of those expressing a preference in an independent patient survey in the USA, UK, Germany, France and Australia, from March 2017. Visit ResMed.com/MaskBrand


1. ResMed fitting study of 74 current CPAP users from June 4 to June 8, 2018 in multiple US locations who trialed ResMed AirFit P30i, Phillips™ Respironics DreamWear gel pillows or ResMed AirFit P10.

2. ResMed Ltd. ResMed AirFit N30i and ResMed AirFit P30i user guide. Bella Vista, Australia; 2018.

3. Koninklijke Philips N.V. Philips Respironics DreamWear gel pillows instructions for use. Murrysville, PA; 2016.


AirFit is a trademark and/or registered trademark of the ResMed family of companies. Brevida and Fisher & Paykel Healthcare are trademarks of Fisher & Paykel Healthcare Limited. DreamWear and Phillips are trademarks of Koninklijke Philips N.V, registered in the US and other countries.