AirMini™

AirMini™

  • Features the same proven ResMed device algorithms 
  • ActiveAir™ technology allows it to be small, quiet and comfortable
  • Effective waterless humidification for portable convenience*
  • Convenient control with the AirMini app
  • AirView™ connectivity to manage patient compliance 
  • Premium travel bag and accessories for therapy on the go 

*Currently not available when using full face masks 

close-icon
  • Small

    AirMini is the world’s smallest CPAP – weighing less than a pound and fitting in the palm of your hand.

  • Smart

    ActiveAir™, HumidX™ and the AirMini app make up a suite of smart technologies that allow AirMini to be comfortable, quiet and easy to use.

  • Proven

    AirMini features the same trusted algorithms as our AirSense™ 10 devices – CPAP, AutoSet™ and AutoSet for Her.

  • Small

    AirMini is the world’s smallest CPAP – weighing less than a pound and fitting in the palm of your hand.

  • Smart

    ActiveAir™, HumidX™ and the AirMini app make up a suite of smart technologies that allow AirMini to be comfortable, quiet and easy to use.

  • Proven

    AirMini features the same trusted algorithms as our AirSense™ 10 devices – CPAP, AutoSet™ and AutoSet for Her.

ActiveAir technology

This crucial technology caps therapy flow while still increasing therapy pressure, which allows the system to be smaller, quieter and more efficient without compromising on therapy delivery or pressure swings.

ActiveAir technology

This crucial technology caps therapy flow while still increasing therapy pressure, which allows the system to be smaller, quieter and more efficient without compromising on therapy delivery or pressure swings.

ActiveAir technology

This crucial technology caps therapy flow while still increasing therapy pressure, which allows the system to be smaller, quieter and more efficient without compromising on therapy delivery or pressure swings.

ActiveAir technology

This crucial technology caps therapy flow while still increasing therapy pressure, which allows the system to be smaller, quieter and more efficient without compromising on therapy delivery or pressure swings.

A fully integrated system

AirMini is more than just a portable CPAP, it’s a turnkey solution for therapy on the go. The AirMini device and setup pack, optimized AirFit™ and AirTouch™ masks and AirMini app give patients what they need to bring high-quality therapy along no matter where life takes them.

Optional accessories like the AirMini travel case and travel bag make it even easier forpatients to pick up and go.

A fully integrated system

AirMini is more than just a portable CPAP, it’s a turnkey solution for therapy on the go. The AirMini device and setup pack, optimized AirFit™ and AirTouch™ masks and AirMini app give patients what they need to bring high-quality therapy along no matter where life takes them.

Optional accessories like the AirMini travel case and travel bag make it even easier forpatients to pick up and go.

Convenient control with the AirMini app

Its quick and easy to apply settings to AirMini from your or your patient’s smart device. Simply access the clinical menu in the AirMini app and choose from therapy mode, pressure, EPR and Ramp to make your changes. 

And once the patient is set up, they can use the app to control a range ‭of comfort settings. Users can also access their score each morning as well as the previous 30 days of sleep data, helping them stay engaged with therapy. 

Convenient control with the AirMini app

Its quick and easy to apply settings to AirMini from your or your patient’s smart device. Simply access the clinical menu in the AirMini app and choose from therapy mode, pressure, EPR and Ramp to make your changes. 

And once the patient is set up, they can use the app to control a range ‭of comfort settings. Users can also access their score each morning as well as the previous 30 days of sleep data, helping them stay engaged with therapy. 

Convenient control with the AirMini app

Its quick and easy to apply settings to AirMini from your or your patient’s smart device. Simply access the clinical menu in the AirMini app and choose from therapy mode, pressure, EPR and Ramp to make your changes. 

And once the patient is set up, they can use the app to control a range ‭of comfort settings. Users can also access their score each morning as well as the previous 30 days of sleep data, helping them stay engaged with therapy. 

Convenient control with the AirMini app

Its quick and easy to apply settings to AirMini from your or your patient’s smart device. Simply access the clinical menu in the AirMini app and choose from therapy mode, pressure, EPR and Ramp to make your changes. 

And once the patient is set up, they can use the app to control a range ‭of comfort settings. Users can also access their score each morning as well as the previous 30 days of sleep data, helping them stay engaged with therapy. 

Accessories for every lifestyle

With a variety of optional accessories available, you can provide your patients with even more flexibility. 

The AirMini travel case offers protection while the travel bag allows patients to keep the device, tubing and mask together while on the go. And for patients who really value discretion and convenience, the AirMini mount system allows them to secure the device in a variety of positions and places.

Accessories for every lifestyle

With a variety of optional accessories available, you can provide your patients with even more flexibility. 

The AirMini travel case offers protection while the travel bag allows patients to keep the device, tubing and mask together while on the go. And for patients who really value discretion and convenience, the AirMini mount system allows them to secure the device in a variety of positions and places.

Support

AirFit P10 for AirMini Usage Videos

 

Maintenance and inspection 

  1. Regular inspection of your mask and its components for signs of damage is important to maintain optimal performance of your mask.
  2. For a thorough inspection, you should first disassemble the mask as per instructions in your user guide and inspect each part individually.

 

Check the mask frame and tube

  1. Examine both the inside and outside of the mask tube for any holes or tears. If damage is found, the frame will need to be replaced.
  2. Hold the frame and gently pull on each arm of your mask to ensure they are firmly attached and will provide good support.

 

Checking the nasal pillows

  1. Examine your nasal pillows inside and out for general wear and tear, blockages, damage and deformed pillows.
  2. A light squeeze on the sides of deformed pillows can help bring them back to shape. Replace them if they are damaged or no longer fit well.

 

Checking the headgear

  1. Hold the headgear in one hand and run your other hand along its length while stretching at various points to check for tears and its elasticity.
  2. If the headgear is torn, lost its elasticity or has damaged seams, you should replace it.

 

AirMini Accessories

 

HumidX system

Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide comfortable and effective humidification.

Learn more

AirMini mount system

The ResMed mount system allows the AirMini device to be secured to various points such as a bedframe, bedside table, wall or airplane seat pocket.

Learn more

AirMini Travel Bag

Take your sleep therapy everywhere you go with the AirMini Travel Bag. Small and compact, it’ll fit the whole solution to keep everything together – so it’s always ready when you are.

Learn more

Disassembly

 

For N20 users

  1. Disconnect the connector from the mask by pressing on its side buttons and pulling away.
  2. Disconnect the vent module from the AirMini tubing by twisting them away from each other.
  3. Disconnect the vent module from the mask tube by twisting them away from each other.
  4. If HumidX or HumidX Plus was used, remove it from the vent module.

 

For F20 users

  1. Disconnect the connector from the mask by pressing on its side buttons and pulling away.
  2. Disconnect the F20 connector from the AirMini tubing by twisting them away from each other. 

 

For P10 users

  1. Disconnect the vent module from the AirMini tubing by twisting them away from each other.
  2. Disconnect the vent module from the mask tube by twisting them away from each other.
  3. If HumidX or HumidX Plus was used, remove it from the vent module.

 

AirMini

  1. Disconnect the AirMini tubing by pressing on the side of the grey cuff and pulling away.
  2. Unplug the power supply unit from the power outlet and the machine.

Daily cleaning

 

For N20 users
Note: Do not wash or wet the HumidX / HumidX Plus. When not in use, store in a clean and dry place.

 

  1. Clean and check the N20 connector by hand daily. Never wash it using a dishwasher or washing machine.
  2. Remove the HumidX before proceeding with cleaning.
  3. Wash the connector in warm water (~30°C or 86°F) and mild liquid detergent.
  4. Clean the connector using a soft bristle brush, with particular attention paid to the vent holes on the inside.
  5. Rinse well under running water, and then shake to remove excess water.
  6. Air dry out of direct sunlight, and check for dirt or dust before use.

 

For F20 users

 

  1. Clean and check the F20 connector by hand daily. Never wash it using a dishwasher or washing machine.
  2. Wash the connector in warm water (~30°C or 86°F) and mild liquid detergent.
  3. Clean the connector using a soft bristle brush, with particular attention paid to the vent holes on the outside.
  4. Rinse well under running water, and then shake to remove excess water.
  5. Air dry out of direct sunlight, and check for dirt or dust before use.

Weekly cleaning

 

AirMini tubing

 

  1. Clean and check the AirMini tubing by hand weekly. Never wash it in a dishwasher or washing machine.
  2. Separate tubing from AcitveAir vent connector.
  3. Soak and wash the tubing in warm water (~30°C or 86°F) and mild liquid detergent.
  4. Rinse well inside and out under running water.
  5. Hang the tubing so that each end can drain, and leave it to air dry out of direct sunlight.
  6. Clean the AirMini by wiping down each side of its exterior carefully with a dry cloth.

AirMini Accessories

 

HumidX system

Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide comfortable and effective humidification.

Learn more

AirMini mount system

The ResMed mount system allows the AirMini device to be secured to various points such as a bedframe, bedside table, wall or airplane seat pocket.

Learn more

AirMini Travel Bag

Take your sleep therapy everywhere you go with the AirMini Travel Bag. Small and compact, it’ll fit the whole solution to keep everything together – so it’s always ready when you are.

Learn more

Inspection and replenishment

 

For F20 users

  1. Check the F20 connector daily for signs of damage or blockages caused by dirt and dust.
  2. The connector should be replaced at least every six months or if there are signs of damage.

 

For N20 users

  1. Check the N20 connector daily for signs of damage or blockages caused by dirt and dust.
  2. The connector should be replaced at least every six months or if there are signs of damage.

 

AirMini tubing

  1. Check the AirMini tubing daily for any holes, tears or cracks.
  2. The tubing should be replaced at least every six months or if there are signs of damage.

 

AirMini air filter

  1. Check the AirMini air filter for any holes, tears, cracks, or blockages caused by dirt or dust.
  2. The air filter should be replaced at least every six months or if there are signs of damage. It cannot be washed.
  3. To change the air filter, slide the air filter cover off and replace the old air filter with a new one.
  4. Attach the air filter cover on again, and ensure it is fitted at all times to prevent water and dust from entering the machine.

 

HumidX and HumidX Plus

  1. Check your HumidX or HumidX Plus daily for signs of damage or blockages caused by dirt and dust. They cannot be washed.
  2. HumidX and HumidX Plus must be replaced within 30 days after opening the packaging or if there are signs of damage.

Humidification

 

  1. To insert the optional HumidX / HumidX Plus, for N20 or AirFit P10 for AirMini users, open the connector by gently twisting.
  2. Grip the HumidX / HumidX Plus at the edges, with blue / grey side facing down towards the tube, and place it inside.
  3. Close the connector by twisting its ends back together until they lock into place.
  4. HumidX and HumidX Plus must be discarded and replaced within 30 days after opening the HumidX / HumidX Plus packaging.

AirMini Accessories

 

HumidX system

Exclusive to AirMini, HumidX and HumidX Plus are small heat and moisture exchangers (HME) that are designed to provide comfortable and effective humidification.

Learn more

AirMini mount system

The ResMed mount system allows the AirMini device to be secured to various points such as a bedframe, bedside table, wall or airplane seat pocket.

Learn more

AirMini Travel Bag

Take your sleep therapy everywhere you go with the AirMini Travel Bag. Small and compact, it’ll fit the whole solution to keep everything together – so it’s always ready when you are.

Learn more

FAQ

  • What therapy mode does the AirMini offer?

    AirMini offers the following therapy modes: CPAP, AutoSet™ (with Response option) and AutoSet for Her. Unlike the AirSense™ 10 series, where different devices offer different therapy modes, the AirMini includes all three of these therapy modes.

  • Will I be able to use this as a full time machine?

    While the AirMini matches the performance of the larger AirSense 10, it was designed to be used as a travel CPAP. ResMed has achieved a significant reduction in size, while maintaining the same quality of therapy, through innovations that include ActiveAir™, HumidX™/HumidX Plus, and the AirMini app. If you have additional questions, please contact your sales representative.

  • What masks can be used with AirMini?

    AirMini is compatible only with the following ResMed masks: AirFit™ F20 AirFit™ N20 AirFit™ P10 for AirMini™ AirTouch™ F20.

  • Why are only some masks compatible with AirMini?

    The AirFit™ F20 AirFit™ N20 AirFit™ P10 for AirMini™ AirTouch™ F20 are the only masks designed to work with the AirMini. Other masks do not work with the AirMini's ActiveAir and HumidX technologies. Please contact your home medical equipment or healthcare provider for additional questions related to masks and AirMini accessories.

  • Does AirMini have a battery?

    We are developing an external battery pack for AirMini. Please visit our website at www.ResMed.com for additional details or contact your sales representative.

  • Does AirMini have a DC-DC converter available?

    We are developing a DC-DC converter for AirMini. Please visit our website at www.ResMed.com for additional details or contact your sales representative.

  • Does AirMini have a humidifier?

    AirMini offers waterless humidification when using N20 or P10 for AirMini. The HumidX/HumidX Plus heat-moisture exchanger is a non-heated, waterless humidification system designed to deliver similar performance to ResMed's AirSense 10 machine, used with an unheated tube and a humidifier setting between 2 and 5. If you have additional questions about humidification, please contact your home medical equipment or healthcare provider.

  • What comes with the AirMini?

    AirMini comes with a cloth carry case and a power cable. Masks and tubing are available for purchase separately.

  • How do I get one?

    You can purchase AirMini through your home medical equipment supplier, or through one of our online vendors.

  • Will insurance cover this device?

    Please contact your insurance company for details about your individual coverage and options.

  • What accessories are available for the AirMini?

    We have a variety of accessories available for the AirMini including HumidX/HumidX Plus waterless humidifiers, filters, a travel bag and travel case, a mount system, a DC/DC converter and an AC adapter.

  • How do I obtain a compliance report for my therapy using AirMini?

    Please contact your home medical equipment or healthcare provider to discuss your options for compliance reporting.

References

1 Results of independent, 3-night US study of 32 patients using ResMed AirMini, HDM Z1 Auto®, and Transcend Auto™ Mini CPAP Jan-Feb 2017. 

*Combined responses of those expressing a preference in an independent patient survey in the USA, UK, Germany, France and Australia, from May 2015. Visit resmed.com/maskbrand