For additional therapy assistance.
The AirFit N30i is designed to provide freedom of movement so you can sleep in the position you find most comfortable, including your side and stomach. The curvature of the cushion and the grip from the SpringFit frame will assist in keeping the mask in place under your nose as you move.
The AirFit N30i provides effective therapy from any sleep position. Even when you are lying on your side, when air flow could potentially be reduced through one side of the frame, the mask will still continue delivering the prescribed therapy by compensating through the other side.
Cleaning the AirFit N30i is similar to cleaning other CPAP masks. When the elbow, headgear and cushion are removed from the frame, the N30i is one tube that can be cleaned the same way as the short tube of other nasal masks or the long CPAP tubing. Wash all components with warm soapy water, rinse thoroughly and let air dry out of direct sunlight. For the frame sleeves, squeeze with a clean towel to remove excess water.
The AirFit N30i is only available with the nasal cradle cushion.
The sound level of the AirFit N30i is within the same range as other nasal masks. Conductive noise through the mask may be heard by some users, however, other users tell us they prefer the freedom of movement and less obtrusive top-of-the-head tube design of AirFit N30i over masks with tubes at the front.
AirFit N30i was specifically designed to slide on and off quickly to make your bedtime routine easier. Pull the frame and headgear over your head until the elbow is positioned on top of your head. Place the cushion under your nose, and then adjust the headgear as necessary. To connect the tubing, pinch the side buttons on the quick-release elbow to remove it from the mask. Insert the tubing and reconnect the elbow to the mask. The quick-release elbow makes it easy to disconnect the mask from the tubing if you need to get up at night.
The AirFit N30i is available in four cushion sizes: small, medium, small wide and wide. To find the right cushion size, place the sizing gauge under your nose. Long, pointy noses will use the blue and red side of the gauge while short, wide noses will use the purple and gray side. Look at both the width and length of the nose on the gauge. If either part of the nose breaches to the second color, size up to the larger cushion (medium or wide).
The cushion size indicator is located on the front right side of the cradle.
The AirFit N30i will use the pillows setting for AirSense™ 10, AirCurve™ 10 and S9™ machines.
*Combined responses of those expressing a preference in an independent patient survey in the USA, UK, Germany, France and Australia, from March 2017. Visit ResMed.com/MaskBrand