AirTouch F20 Support
Item Code : 63000, 63001, 63002, 63003, 63004

Select model:

Sizing for your AirTouch F20

  1. You can print your ResMed sizing guide here . Remember to print to scale. You’ll have to trim your guide from the paper.
  2. Using a mirror, hold your sizing guide to your face. The top of the guide should correspond with the top of your nasal bridge.
  3. If you’re between sizes, we recommend selecting the larger option for greater comfort.

Fitting your AirTouch F20

  1. Unclip the magnetic clips.
  2. With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck – with the top of the headgear sitting at the top of your crown.
  3. Bring each of the magnets up to meet their corresponding clips on the frame.
  4. Adjust the tabs on the upper headgear.
  5. Adjust the tabs on the lower headgear.
  6. With your device still switched off, connect your device tubing to your mask elbow.
  7. Connect the elbow to your mask.

    To prepare your mask for therapy:
  8. Switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
  9. Adjust your upper straps.
  10. Adjust your lower straps.
  11. Practice reseating your cushion – turn off your device, pull your mask away from your face, allow your cushion to reassume its natural shape and then resettle your cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.

    These instructions are for general information purpose only. For full details, consult the user guide.

Fitting your AirTouch F20

  1. Unclip the magnetic clips.
  2. With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck – with the top of the headgear sitting at the top of your crown.
  3. Bring each of the magnets up to meet their corresponding clips on the frame.
  4. Adjust the tabs on the upper headgear.
  5. Adjust the tabs on the lower headgear.
  6. With your device still switched off, connect your device tubing to your mask elbow.
  7. Connect the elbow to your mask.

    To prepare your mask for therapy:
  8. Switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
  9. Adjust your upper straps.
  10. Adjust your lower straps.
  11. Practice reseating your cushion – turn off your device, pull your mask away from your face, allow your cushion to reassume its natural shape and then resettle your cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.

Disassembling your AirTouch F20

  1. Remove elbow from frame.
  2. Unclip the magnetic clips.
  3. Undo upper headgear tabs.
  4. Pull strapping away from frame.
  5. Pull cushion away from frame.

Cleaning your AirTouch F20 (Daily)

  1. Disassemble mask.
  2. If necessary, wipe down the cushion with dry or non-alcoholic wipes only. Do not get the cushion wet.
  3. Rinse frame and elbow under running water. Clean each component with a soft bristle brush.
  4. Soak components in warm water with mild liquid detergent for up to 10 minutes.
  5. Shake components in water.
  6. Brush moving parts of elbow and around vent holes.
  7. Brush areas of frame where arms connect, and inside and outside the frame where the elbow connects.
  8. Rinse components under running water.
  9. Leave components to air dry out of direct sunlight – making sure to squeeze the arms of the frame to ensure excess water is removed.

Assembling your AirTouch F20

  1. Attach cushion to frame.
  2. Attach the magnetic clips.
  3. Connect upper headgear straps.
  4. Connect elbow to mask frame.

    These instructions are for general information purpose only. For full details, consult the user guide.

Managing leaks with your AirTouch F20

  1. When your mask’s seal is compromised by movement or a poor fit, you sometimes get leaks.
  2. To find a source of a leak, run a finger along the edge of your mask’s seal. Once you’ve located the leak, adjust your headgear.
  3. You may stop leaks in the upper part of your mask by adjusting the upper straps, and adjusting the lower straps to stop lower mask leaks.
  4. If a leak persists, turn off your device and pull your mask away from your face. Allow your cushion to reassume its natural shape and then gently resettle it on your face. The cushion should sit on the top of your nasal bridge.
  5. If you still have leaks, you may need a different size mask. Try our sizing guide or speak to your healthcare provider about getting a mask in a different size.

Maintaining your AirTouch F20

  1. To optimize your therapy, your mask should be checked regularly for signs of damage and deterioration.
  2. When cleaning your mask, you should also check each component for damage. Your cushion, frame, tubing, elbow and headgear should all be regularly checked for cracks and tears. Refer to the user guide for more information on replacement.
  3. If any component of your mask is cracked or torn, it may need a replacement.

Cleaning your AirTouch F20 (Daily)

  1. Disassemble mask.
  2. If necessary, wipe down the cushion with dry or non-alcoholic wipes only. Do not get the cushion wet.
  3. Rinse frame and elbow under running water. Clean each component with a soft bristle brush.
  4. Soak components in warm water with mild liquid detergent for up to 10 minutes.
  5. Shake components in water.
  6. Brush moving parts of elbow and around vent holes.
  7. Brush areas of frame where arms connect, and inside and outside the frame where the elbow connects.
  8. Rinse components under running water.
  9. Leave components to air dry out of direct sunlight – making sure to squeeze the arms of the frame to ensure excess water is removed.

Cleaning your AirTouch F20 (Weekly)

  1. Disassemble mask. The magnetic clips can remain attached to headgear during cleaning.
  2. Handwash headgear in warm water with mild liquid detergent.
  3. Rinse headgear under running water. Inspect to ensure headgear is clean and detergent-free. Wash and rinse again, if necessary.
  4. Squeeze headgear to remove excess water.
  5. Leave headgear to air dry out of direct sunlight.

Replenishment
ResMed recommends regularly replacing your components to ensure optimum mask performance.

Every 1 month*

Cushion

Every 3 months*

Tubing

Every 6 months*

Headgear

*Replacement cycles may vary depending on your insurance—contact your medical equipment provider for more information.

Getting started with therapy
Get on the right track with your sleep therapy.

Your therapy basics

The how, what, where and why…

The benefits of therapy

What does therapy do for you…

Think positive

Some helpful tips…

Do you still have a question?
1 (800) 424-0737