Full face mask
AirTouch™ F20
- ResMed UltraSoft™ memory foam cushion brings superior comfort
- Flexible fabric-lined frame delivers breadth of fit
- Easy to use magnetic clips enable quick fitting
- Clear field of vision permits reading and watching TV
- Modular, so can be used with AirFit™ F20 frame and headgear
- Suitable for patients who breathe through their mouth while sleeping
Superior comfort and uncompromising seal
Unique to ResMed’s AirTouch F20, our new UltraSoft memory foam cushion adapts to your facial profile, seals naturally and prevents leaks. This, for a light and gentle experience of sleep therapy.
Read MoreThe memory foam has unique features that give less friction and contact pressure than a standard silicone softener - even when it is firmly against your face. This reduces the risk of red marks on the face. Because the memory foam is permeable, it allows a very small amount of air to pass through the soft tissue, giving a more natural sleep experience without less treatment.
The memory foam has unique features that give less friction and contact pressure than a standard silicone softener - even when it is firmly against your face. This reduces the risk of red marks on the face. Because the memory foam is permeable, it allows a very small amount of air to pass through the soft tissue, giving a more natural sleep experience without less treatment.
The memory foam has unique features that give less friction and contact pressure than a standard silicone softener - even when it is firmly against your face. This reduces the risk of red marks on the face. Because the memory foam is permeable, it allows a very small amount of air to pass through the soft tissue, giving a more natural sleep experience without less treatment.
The memory foam has unique features that give less friction and contact pressure than a standard silicone softener - even when it is firmly against your face. This reduces the risk of red marks on the face. Because the memory foam is permeable, it allows a very small amount of air to pass through the soft tissue, giving a more natural sleep experience without less treatment.
Easy to care for
Thanks to a regularly replaceable cushion, the AirTouch 20 series helps you refresh your experience of sleep therapy and allows for a simpler, smoother cleaning process.
Read MoreNo more mask cleaning when you wake up each morning – a simple wipe down with a CPAP wipe is all that’s needed!
Freedom of choice
AirTouch F20 is made with interchangeable components that allow you to easily mix and match them with AirFit F20 mask. AirTouch F20 cushions are also compatible with AirFit F20 for Her masks, so female patients can enjoy the comfort of Ultra-Soft foam alongside the outstanding fit of a female-specific mask.
A wider set of options makes it easier to find a solution that maximises comfort, therapy compliance and success.
Compatible with AirMini
AirTouch F20 is compatible with AirMini™, the world’s smallest* travel PAP machine.
* As of 04, April 2017. 136 mm (W) x 84 mm (H) x 52 mm (D), 250 cm³.
Relax in quiet comfort
Featuring the revolutionary QuietAir™ diffuser vent, ResMed AirTouch™ F20 is our quietest mask ever.
With QuietAir, noise is minimised and airflow is so soft you might not feel it at all. You can simply enjoy a more peaceful night’s sleep and the freedom to sleep closer and more naturally with your partner.
Explore
Support
Support
<
>
Sizing for your AirTouch F20
- You can print your ResMed sizing guide here . Remember to print to scale, as you’ll have to cut out your guide from the document you print. If you prefer, we can also send you a sizing guide by mail, simply send us your posting details.
- Once you have your sizing guide: Use a mirror and hold the sizing guide to your face. The top of the guide should correspond with the top of your nasal bridge. The lower part of the guide indicates which mask size is best for your face. The size that aligns with the crease below your lower lip will be your best fit.
- If you’re between sizes, we recommend selecting the larger option for greater comfort.
- As an alternative to using a sizing guide, you can also use a straight ruler to measure the distance from the bridge of your nose (between your eyes) to the dip between your lower lip and your chin. Different measurements correspond to the following sizes:
Between 74-86 mm: Small
Between 86-98 mm: Medium
Between 98-110 mm: Large
Fitting your AirTouch F20
- Unclip the EasyClick Magnets.
- With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck - with the top of the headgear sitting on your crown.
- Bring each of the magnets up to meet their corresponding clips on the frame.
- Adjust the tabs on the upper headgear straps.
- Adjust the tabs on the lower headgear straps.
- With your device still switched off, connect your device tubing to your mask elbow.
- Connect the elbow to your mask.
- To ensure your fit will work with your therapy: switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
- Adjust your upper straps.
- Adjust your lower straps.
- Practice reseating your cushion – pull your mask away from your face, allow your cushion to reassume its natural shape, and then resettle your cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.
Fitting your AirTouch F20
- Unclip the EasyClick Magnets.
- With the mask held against your face, pull the headgear over your head. Ensure the top of the mask cushion is sitting comfortably at the top of your nasal bridge. The bottom of your headgear should settle comfortably at the top of your neck - with the top of the headgear sitting on your crown.
- Bring each of the magnets up to meet their corresponding clips on the frame.
- Adjust the tabs on the upper headgear.
- Adjust the tabs on the lower headgear.
- With your device still switched off, connect your device tubing to your mask elbow.
- Connect the elbow to your mask.
- To ensure your fit will work with your therapy: Switch on your device and position yourself as if you are to begin therapy (e.g. lying down in bed).
- Adjust your upper straps.
- Adjust your lower straps.
- Practice reseating your cushion –pull your mask away from your face, allow your cushion to reassume its natural shape, and then resettle your cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.
These instructions are for general information purpose only. For full details consult the user guide.
Disassembling your AirTouch F20
- Remove elbow from frame.
- Unclip the EasyClick Magnets.
- Undo upper headgear tabs.
- Pull strapping away from frame.
- Pull cushion away from frame.
Cleaning your AirTouch F20 (Daily)
- Disassemble mask.
- If required, wipe your cushion with a CPAP wipe or equivalent and then allow to dry. Important – do not get cushion wet.
- Rinse frame and elbow under running water. Clean each component with a soft bristle brush.
- Soak components in warm water with mild liquid detergent for up to ten minutes.
- Shake components in water.
- Brush moving parts of elbow and around vent holes.
- Brush areas of frame where arms connect, and inside and outside the frame where the elbow connects.
- Rinse components under running water.
- Leave components to air dry out of direct sunlight – making sure to squeeze the arms of the frame to ensure excess water is removed.
Cleaning your AirTouch F20 (Weekly)
- Disassemble mask. EasyClick magnets can remain attached to headgear during cleaning.
- Handwash headgear in warm water with mild liquid detergent.
- Rinse headgear under running water. Inspect to ensure headgear is clean and detergent free. Wash and rinse again, if necessary.
- Squeeze headgear to remove excess water.
- Leave headgear to air dry out of direct sunlight.
Assembling your AirTouch F20
- Attach cushion to frame.
- Attach the EasyClick Magnets.
- Connect upper headgear straps.
- Connect elbow to mask frame.
These instructions are for general information purpose only. For full details consult the user guide.
Managing leaks with your AirTouch F20
- Leak often occurs when your mask’s seal is compromised by movement, incorrect fitting or improper sizing.
- To find a source of leak, run your finger along the edge of your mask’s seal. Once located, adjust your headgear.
- Resolve any leak in the upper part of your mask by adjusting your upper straps.
- Resolve lower mask leak with your lower straps.
- If leak persists, reseal by turning off your device, pulling your mask away from your face, allowing your cushion to reassume its natural shape, and then resettling your mask cushion on your face, with the top of the cushion sitting at the top of your nasal bridge.
- If leak continues, you may need a different size mask. Try our sizing guide or speak to your healthcare provider about getting a different size mask.
Maintaining your AirTouch F20
- To maintain optimum therapy performance, your mask should be checked regularly for signs of damage and deterioration.
When cleaning your mask, you should also check each component for damage. Your cushion, frame, tubing, elbow and headgear should all be regularly checked for cracks and tears.
If any component of your mask is cracked or torn, it may be damaged and in need of replacement.
To ensure optimum comfort and seal, we recommend regularly replenishing your AirTouch F20 mask cushion.
Cleaning your AirTouch F20 (Daily)
- Disassemble mask.
- If required, wipe your cushion with a CPAP wipe or equivalent and then allow to dry. Important – do not get cushion wet.
- Rinse frame and elbow under running water. Clean each component with a soft bristle brush.
- Soak components in warm water with mild liquid detergent for up to ten minutes.
- Shake components in water.
- Brush moving parts of elbow and around vent holes.
- Brush areas of frame where arms connect, and inside and outside the frame where the elbow connects.
- Rinse components under running water.
- Leave components to air dry out of direct sunlight – making sure to squeeze the arms of the frame to ensure excess water is removed.
Cleaning your AirTouch F20 (Weekly)
- Disassemble mask. EasyClick magnets can remain attached to headgear during cleaning.
- Handwash headgear in warm water with mild liquid detergent.
- Rinse headgear under running water. Inspect to ensure headgear is clean and detergent free. Wash and rinse again, if necessary.
- Squeeze headgear to remove excess water.
- Leave headgear to air dry out of direct sunlight.
These instructions are for general information purpose only. For full details consult the user guide.
An ecosystem of solutions for individual answers
From diagnostics and healthcare informatics to therapy devices and masks, our solutions can help you get a better night’s rest. Crafted to offer both confidence and flexibility, our products allow for a high-quality therapy experience catered to your needs.
Our device, mask and accessory ranges, together with our online support program myAir™, enable you to easily customise your therapy experience to your preferences.
