AirFit F30

Ultra-compact full-face mask
AirFit F30

  • Under-the-nose design means no red marks on nasal bridge
  • Quiet diffused venting allows you to sleep close to your bed partner
  • Easy-to-use magnetic clips for quick fitting
  • Clear field of vision makes it easy to read

No red marks on the bridge of your nose

The F30’s ultra-compact frame sits comfortably under your nose, not over it. Less facial contact looks good, feels good and means you can say goodbye to red marks and pressure on the bridge of your nose.

No red marks on the bridge of your nose

The F30’s ultra-compact frame sits comfortably under your nose, not over it. Less facial contact looks good, feels good and means you can say goodbye to red marks and pressure on the bridge of your nose.

Peace and quiet

AirFit F30 with the QuietAir™ elbow is quieter than the leading ultra-compact full face mask from competitors1. The QuietAir™ elbow gently and quietly diffuses exhaled air from your mask to create a quieter, more restful atmosphere with almost no noticeable draughts². 

Peace and quiet

AirFit F30 with the QuietAir™ elbow is quieter than the leading ultra-compact full face mask from competitors1. The QuietAir™ elbow gently and quietly diffuses exhaled air from your mask to create a quieter, more restful atmosphere with almost no noticeable draughts². 

Visual freedom

The under-the-nose design means the AirFit F30 is noticeably smaller, more discreet and more attractive than a traditional full-face mask.

With nothing on your nasal bridge, you can easily rediscover simple pleasures like wearing glasses and reading in comfort.

Visual freedom

The under-the-nose design means the AirFit F30 is noticeably smaller, more discreet and more attractive than a traditional full-face mask.

With nothing on your nasal bridge, you can easily rediscover simple pleasures like wearing glasses and reading in comfort.

Explore

left-rotate right-rotate

Support

Packages

Packages

There are two mask systems, each of which is delivered with 1 headgear and 1 cushion as follows:

1.Small mask system: 1 single-size headgear, 1 small cushion 

2.Medium mask system: 1 single-size headgear, 1 medium cushion

Please note: The headgear is single-size but is fully adjustable at 5 points and features straps and magnets for ease of use and adjustment.

Sizing cushion

Step1 -Print the template in the right dimensions (check the scale).

Step2 -Place the template below your nose, perpendicular to your face.

Step3 -Assess the width of your nose and the corresponding cushion size. If your nose sits within the red border, choose the small cushion. If your nose extends into the blue border, choose the medium cushion.

 

Fitting

Step 1 -Ensure the magnets are open on the lower headgear straps. 

Step 2 -Bring the cushion under your nose with one hole under each of your nostrils and the small membrane sitting comfortably between them.

Step 3 - Pull the headgear over your head while holding the cushion securely under your nose.

Step 4 -Bring the lower headgear straps under your ears and attach each magnetic clip to the frame. 

Step 5 - Adjust the upper headgear straps until the mask is secure.

Step 6 - Adjust the lower headgear straps until the mask is secure.

Step 7 -Adjust the headgear strap on the top of your head until the mask is secure and the strap sits close to the centre of your head. If you feel that your nose is being pushed up, the headgear is too tight and you should loosen the straps. If you feel that the cushion is sliding around under your nose, the headgear is too loose and you should tighten the straps.

Step 8 -Connect the air tubing from your device to the mask elbow.

Hair management

Step1 - Long untied hair back should not sit underneath the headgear. 

Step2 -Long untied hair should be pulled through the headgear and back behind your ears.

Step3 - Ponytails should not sit underneath the headgear.

Step4 - Ponytails should be pulled through the headgear and behind your head.

 

These instructions are for general information purpose only. For full details consult the user guide.

Fitting

Step 1 -Ensure the magnets are open on the lower headgear straps. 

Step 2 -Bring the cushion under your nose with one hole under each of your nostrils and the small membrane sitting comfortably between them.

Step 3 - Pull the headgear over your head while holding the cushion securely under your nose.

Step 4 -Bring the lower headgear straps under your ears and attach each magnetic clip to the frame. 

Step 5 -Adjust the upper headgear straps until the mask is secure

Step 6 - Adjust the lower headgear straps until the mask is secure.

Step 7 - Adjust the headgear strap on the top of your head until the mask is secure and the strap sits close to the centre of your head.

Step 8 -Connect the air tubing from your device to the mask elbow.

 

Assembly

Step  1 -  Check that you have all the mask components as pictured. 

Step 2 - Ensure that the ResMed logo on the headgear is facing outwards.

Step 3 -Thread the left upper headgear into the left side of the frame and fasten the Velcro tab.

Step 4 -Thread the right upper headgear into the right side of the frame and fasten the Velcro tab.

Step 5 -Align the cushion with the frame and connect them together.

Step 6 -Connect the elbow to the frame.

 

Disassembly

Step 1 -Ensure your mask is disconnected from your machine.

Step 2 -Unfasten the left upper headgear strap and pull it away from the frame.

Step 3 -Unfasten the right upper headgear strap and pull it away from the frame.

Step 4 -Squeeze the side buttons on the elbow and detach it from the frame.

Step 5  - Pull the cushion away from the frame.

 

Quick release

 

Step 1 -First stop your device. 

Step 2 -Disconnect the elbow and attached tubing from your mask by squeezing the elbow's buttons and pulling it out.

Step 3 -Reconnect the elbow and tubing by clicking it back into the mask.

Step 4 -Restart your therapy.

 

Daily cleaning

Step 1 -Disassemble the mask into its components, and place the headgear aside.

Step 2 -Soak and agitate the mask elbow, frame and cushion in warm soapy water for at least one minute.

Step 3 - Hand wash each of the components with a soft bristle brush.

Step 4 -Rinse each of the components under running water to remove any suds.

Step 5 -  Leave the components to air dry away from direct sunlight.

 

These instructions are for general information purpose only. For full details consult the user guide.

 

Managing leak

Step 1 - You will first need to check where the leak is coming from.

Step 2 - You can try resealing the mask by pulling it away from your face and letting it settle back into position. 

Step 3 - Adjust the top headgear strap to correct minor leaks.

Step 4 -Adjust the upper straps to correct leaks from the upper areas of the mask.

Step 5 - Adjust the lower straps to correct leaks from the lower areas of the mask.

Step 6 - Check that both the frame and headgear are secure and comfortable.

 

Consult a qualified health professional if you experience a recurrent leak problem.

 

 

Daily cleaning

Step  1 -  Disassemble the mask into its components, and place the headgear aside.

Step 2 - Soak and agitate the mask elbow, frame and cushion in warm soapy water for at least one minute.

Step 3 -Hand wash each of the components with a soft bristle brush.

Step 4 -Rinse each of the components under running water to remove any suds.

Step 5 - Leave the components to air dry away from direct sunlight.

 

Weekly cleaning

Step 1 -Take the headgear off the mask and set aside.

Step 2 -Soak and agitate the headgear in warm soapy water for at least one minute.

Step 3 -Hand wash the headgear by gently rubbing and squeezing it.

Step 4 -Rinse the headgear under a running water to remove any suds, and then squeeze it to remove excess water.

Step 5 -Leave the headgear to air dry away from direct sunlight.

 

Mask Inspection

Step 1 -Examine the mask system and familiarize yourself with its components.

Step 2 -Disassemble the mask as per User Guide instructions.

Step 3 -Examine the headgear by checking and pulling lightly on its straps. 

Step 4 -Examine the elbow inside and out for damage, paying attention to the inner flaps and vent holes.

Step 5 - Examine the frame on both sides for cracks and damage.

Step 6 -Examine the cushion inside and out for tears and damage.

Step 7 - Reassemble the mask as per User Guide instructions.

 

These instructions are for general information purpose only. For full details consult the user guide.

 

More Products

AirFit F20

Designed to fit every face with ease, AirFit F20 combines innovative cushion design with easy-to-use features to deliver an outstanding experience for full face mask users. 

More information

AirTouch F20

The AirTouch F20, ResMed's softest mask ever, features a revolutionary ResMed UltraSoftTM memory foam cushion that conforms to the unique contours of each face. 

More information

AirFit F20 for Her

Designed to fit every face with ease, AirFit F20 combines innovative cushion design with easy-to-use features to deliver an outstanding experience for her.

More information

Reference

  1. Comparing the competitors' public available user guides with AirFit F30 sound power registered during ResMed internal testing: eLB1423-4053. Data on files; ID A4457865 / A4457866 / A4402795.
  2. With the addition of the QuietAir diffuse elbow the mask sound power is recorded as 21dbA for AirFit F20 mask. Reduction in sound power level of 10 dBA compared with the standard F20 elbow. Data on file; ID A4114547.

Do you have a question?

Phone number : 0800 917 7071 operationsuk@resmed.co.uk