The enhanced Easy-Breathe motor features small diameter lightweight impellers which provide lower inertia. This enables the motor to track your normal breathing waveform and produce the small oscillations in pressure required to detect central sleep apnoeas.
If the air in the mask feels too warm or too cold, the patient can adjust the temperature to find what is most comfortable or turn it off completely. The tube temperature can be set to anywhere between 16-30°C.
The temperature sensor located at the mask end of the ClimateLine air tubing enables the system to automatically control the temperature of the air delivered to the patient. This ensures the temperature of the air delivered to the patient does not fall below the set minimum temperature, therefore maximising breathing comfort for the patient.
The humidifier moistens the air and is designed to make therapy more comfortable. If the patient has a dry nose or mouth, turn up the humidity. If the patient is receiving excessive moisture in their mask, turn down the humidity.
The humidity level can be set to Off or between 1 and 8, where 1 is the lowest humidity setting and 8 is the highest humidity setting.
For each humidifier setting, the Climate Control system delivers a constant amount of water vapour, or absolute humidity (AH), to the patient’s upper airway.
*Note: The Enhanced AutoSet Algorithm is only available in the S9 AutoSet. Central Sleep apnoea (CSA) detection is available in both S9 AutoSet and S9 Elite.
Convenient, comfortable and user-friendly, ResMed's SlimLine tubes are 40% lighter and 20% thinner and takes up 35% less space than standard tubes.*
* Compared to standard 19 mm tubing