Ultra-compact full-face mask
AirFit F30

  • Under-the-nose design means no red marks on nasal bridge
  • Quiet diffused venting allows patients to sleep closer to their bed partner
  • Easy-to-use magnetic clips facilitate quick fitting
  • Clear field of vision makes it easy to read
  • Few parts and part numbers facilitates stock management and resupply

Less is more

The ultra-compact F30 mask allows you to reach a broader population. The under-the-nose design eliminates issues associated with discomfort and facial marking on the nasal bridge, advisable for patients with claustrophobia or sensitive skin.

The F30 is also a solution for patients who want to wear glasses or read during therapy. 

Peaceful relaxation

The AirFit F30 features the same performant QuietAirTM vent as the AirFit F20 high-performance mask, gently diffusing exhaled air to limit noise and create a relaxing environment in the bedroom. 

Streamlined operations

You can achieve fast and effective fitting¹ with just one frame, one headgear and two cushion sizes. This streamlined setup simplifies stock management and logistics. 

Accurate first-time fit helps to reduce callbacks and refits.

Explore

left-rotate right-rotate

Support

Sizing cushion

  1. Familiarize yourself with the sizing template and the cushion sizes available.
  2. Use the sizing template to assess the correct width of the patient's nose and corresponding cushion size.
  3. For noses that sit within the red border, choose the small cushion. For noses that extend into the blue border, choose the medium cushion.

Fitting

  1. Ensure the lower headgear straps are not connected to the frame.
  2. With the headgear resting over the mask, bring the cushion under your nose.
  3. Pull the headgear over your head while holding the cushion securely under your nose.
  4. Bring the lower headgear straps under your ears and attach each magnetic clip to the frame.
  5. Adjust the upper headgear straps until the mask is secure.
  6. Adjust the lower headgear straps until the mask is secure.
  7. Adjust the top headgear strap until the mask is secure and so that the strap sits close to the centre of your head.

    These instructions are for general information purpose only. For full details consult the user guide.

Accessories
ResMed offers a range of accessories and spare parts for our sleep apnea therapy and CPAP masks, devices and humidifiers.

Tubing wraps

A soft, microfiber covering designed to keep mask tubing warm to help prevent condensation.More information…

CPAP Mask Wipes

ResMed CPAP Mask Wipes are a fast and easy cleaning solution for any CPAP mask. More information…

Contour CPAP pillow and pillow covers

The Contour CPAP pillow helps sleep more comfortably when wearing a CPAP mask.. More information…

Getting started with therapy
Get on the right track with your sleep therapy.

Your therapy basics

The how, what, where and why…

The benefits of therapy

What does therapy do for you…

Think positive

Some helpful tips…

Assembly

  1. Check that you have all the mask components as pictured.
  2. Ensure that the ResMed logo on the headgear is facing outwards.
  3. Thread the left upper headgear into the left side of the frame and fasten the Velcro tab.
  4. Thread the right upper headgear into the right side of the frame and fasten the Velcro tab.
  5. Align the cushion with the frame and connect them together.
  6. Connect the elbow to the frame.

Disassembly

  1. Ensure your mask is disconnected from your machine.
  2. Unfasten the left upper headgear strap and pull it away from the frame.
  3. Unfasten the right upper headgear strap and pull it away from the frame.
  4. Squeeze the side buttons on the elbow and detach it from the frame.
  5. Pull the cushion away from the frame.

Quick release

  1. First stop your device.
  2. Disconnect the elbow and attached tubing from your mask by squeezing the elbow's buttons and pulling it out.
  3. Reconnect the elbow and tubing by clicking it back into the mask.
  4. Restart your therapy.

Daily cleaning

  1. Disassemble the mask into its components, and place the headgear aside.
  2. Soak and agitate the mask elbow, frame and cushion in warm soapy water for at least one minute.
  3. Hand wash each of the components with a soft bristle brush.
  4. Rinse each of the components under running water to remove any suds.
  5. Leave the components to air dry away from direct sunlight.

Weekly cleaning

  1. Take the headgear off the mask and set aside.
  2. Soak and agitate the headgear in warm soapy water for at least one minute.
  3. Hand wash the headgear by gently rubbing and squeezing it.
  4. Rinse the headgear under a running water to remove any suds, and then squeeze it to remove excess water.
  5. Leave the headgear to air dry away from direct sunlight.

Managing leak

  1. You will first need to check where the leak is coming from.
  2. You can try resealing the mask by pulling it away from your face and letting it settle back into position.
  3. Adjust the top headgear strap to correct minor leaks.
  4. Adjust the upper straps to correct leaks from the upper areas of the mask.
  5. Adjust the lower straps to correct leaks from the lower areas of the mask.
  6. Check that both the frame and headgear are secure and comfortable.

    These instructions are for general information purpose only. For full details consult the user guide.

Accessories
ResMed offers a range of accessories and spare parts for our sleep apnea therapy and CPAP masks, devices and humidifiers.

Tubing wraps

A soft, microfiber covering designed to keep mask tubing warm to help prevent condensation.More information…

CPAP Mask Wipes

ResMed CPAP Mask Wipes are a fast and easy cleaning solution for any CPAP mask. More information…

Contour CPAP pillow and pillow covers

The Contour CPAP pillow helps sleep more comfortably when wearing a CPAP mask.. More information…

Reference

  1. ResMed external 7 days clinical study of existing 21 ResMed and non-ResMed patients, conducted between 16/04/2018 - 05/05/2018. Data on file; ID A4356449.

Do you still have a question?
Contact Us