Nasal mask
AirFit N20

360 Views

Select model:

  • InfinitySeal silicone cushion designed to accommodate your movements and tolerate misfitting
  • Flexible fabric-lined frame delivers breadth of fit while adding comfort
  • Easy to use magnetic clips for quick fitting
  • Plush headgear assists in giving a more comfortable night’s therapy

An easy fit with the InfinitySeal technology

In a recent international study, the Airfit N20 InfinitySeal cushion has been proven to fit 99.4% of all faces.1

Regardless of your face shape or size, the silicone cushion adapts to your profile thanks to its uniquely contoured design. Moving comfortably with you through the night, it provides a secure fit and comfortable seal tailored to your therapy needs.

Patient tested and preferred

Extensively tested and designed to give you the best therapy experience, AirFit N20 is a proven choice for comfort and ease of use. In a recent study, 88% of patients found AirFit N20 more comfortable and easier to use than the current market-leading nasal mask.2

Its features combine to deliver a comprehensively superior mask experience – with 92% of patients saying they preferred wearing the AirFit N20 over the current market-leading nasal mask.2

Our AirFit N20 for Her range

Dedicated purely to women, this range was specifically designed to give every woman a more personalised mask that better meets her unique facial features and adapts to the way she sleeps. 

Explore

left-rotate right-rotate

Support

Sizing for your AirFit N20

  1. You can print your ResMed sizing guide here. Remember to print to scale, as you’ll have to cut out your guide from the document you print. If you prefer, we can also send you a sizing guide by mail, simply send us your posting details.
  2. Once you have your sizing guide:
  3. use a mirror and hold the sizing guide to your face.
  4. Try fitting your nose into each sizing option. The most comfortable one will provide you with the best fit.
  5. As an alternative to using a sizing guide, you can also measure your nose width with a ruler. Different measurements correspond to the following sizes:
  6. Between 23-37 mm: Small
  7. Between 30-45 mm: Medium
  8. Between 45-55 mm: Large

Fitting your AirFit N20

  1. Unclip the EasyClickTM Magnets.
  2. With the mask held against your face, pull the headgear over your head.
  3. Bring each of the magnets up to meet their corresponding clips on the frame.
  4. Adjust the tabs on the upper headgear straps.
  5. Adjust the tabs on the lower headgear straps.
  6. With your device still switched off, connect your device tubing to your mask elbow.
  7. Connect the elbow to your mask.
  8. Switch on your therapy device.

These instructions are for general information purpose only. For full details consult the user guide.

Getting started with therapy
Get on the right track with your sleep therapy.

Your therapy basics

The how, what, where and why…

The benefits of therapy

What does therapy do for you…

Think positive

Some helpful tips…

Fitting your AirFit N20

  1. Unclip the EasyClickTM Magnets.
  2. With the mask held against your face, pull the headgear over your head.
  3. Bring each of the magnets up to meet their corresponding clips on the frame.
  4. Adjust the tabs on the upper headgear straps.
  5. Adjust the tabs on the lower headgear straps.
  6. With your device still switched off, connect your device tubing to your mask elbow.
  7. Connect the elbow to your mask.
  8. Switch on your therapy device.

Disassembling your AirFit N20

  1. Remove elbow from frame.
  2. Unclip the EasyClick Magnets.
  3. Undo upper headgear tabs.
  4. Pull strapping away from frame.
  5. Pull cushion away from frame.

Cleaning your AirFit N20 (Daily)

  1. Disassemble mask.
  2. Soak cushion, elbow and short tubing in warm water (approximately 86°F/30°C) with mild liquid detergent for up to ten minutes. To ensure a thorough clean, shake components in water.
  3. Clean components with a soft-bristle brush.
  4. Rinse components under warm water. Inspect each component to ensure that each is clean and free of detergent residue. Wash and rinse again, if necessary.
  5. Leave mask components to air dry out of direct sunlight.

Assembling your AirFit N20

  1. Attach cushion to frame.
  2. Attach the EasyClick Magnets.
  3. Connect upper headgear straps.
  4. Connect elbow to mask frame.

Haircare Tips for AirFit N20

These instructions are for general information purpose only. For full details consult the user guide.

Managing leak with your AirFit N20

  1. Leak often occurs when your mask’s seal is compromised by movement, incorrect fitting or improper sizing.
  2. To find a source of leak, run your finger along the edge of your mask’s seal to locate where air is escaping.
  3. Leak in the upper part of your mask can be resolved by adjusting your upper straps.
  4. Leak in the lower part of the mask can be resolved with your lower straps.
  5. If leak persists, reseal by briefly pulling your mask away from your face and letting your cushion reinflate.
  6. If these steps do not resolve the issue, you may need a different size mask. Try using our sizing guide or speaking to your healthcare provider about different size masks.

Maintaining your AirFit N20

  1. To maintain optimum therapy performance, your mask should be checked regularly for signs of damage and deterioration.
  2. When cleaning your mask, you should also check each component for damage. Your cushion, frame, tubing, elbow and headgear should all be regularly checked for cracks and tears.
  3. If any component of your mask is cracked or torn, it may be damaged and in need of replacement.
  4. It’s also important to regularly replenish your mask cushion.

Cleaning your AirFit N20 (Daily)

  1. Disassemble mask.
  2. Soak cushion, elbow and short tubing in warm water (approximately 86°F/30°C) with mild liquid detergent for up to ten minutes. To ensure a thorough clean, shake components in water.
  3. Clean components with a soft-bristle brush.
  4. Rinse components under warm water. Inspect each component to ensure that each is clean and free of detergent residue. Wash and rinse again, if necessary.
  5. Leave mask components to air dry out of direct sunlight.

Cleaning your AirFit N20 (Weekly)

  1. Disassemble mask. EasyClick Magnets can remain attached to headgear during cleaning.
  2. Soak frame and headgear in warm water (approximately 86°F/30°C) with mild liquid detergent for up to ten minutes. To ensure a thorough clean, shake frame and headgear in water.
  3. Rinse both components in clean water. Squeeze each repeatedly to ensure detergent is fully removed. Inspect each component to ensure that each is clean and free of detergent residue. Wash and rinse again, if necessary.
  4. Rinse components under warm water. Inspect each component to ensure that each is clean and free of detergent residue. Wash and rinse again, if necessary.
  5. Squeeze each component repeatedly to remove excess water.
  6. Leave both components to air dry out of direct sunlight.

These instructions are for general information purpose only. For full details consult the user guide.

Replenishment
ResMed recommend regulary replacing your components to ensure optimum mask performance.

Every 6 months*

Cushion

Every 6 months*

Tubing

Every 12 months*

Headgear

*Replacement cycles may vary depending on your insurance—contact your ResMed representative for more information.

Contact your representative

Accessories
ResMed offers a range of accessories and spare parts for our sleep apnea therapy and CPAP masks, devices and humidifiers.

Tubing wraps

A soft, microfiber covering designed to keep mask tubing warm to help prevent condensation.More information…

CPAP Mask Wipes

ResMed CPAP Mask Wipes are a fast and easy cleaning solution for any CPAP mask. More information…

Contour CPAP pillow and pillow covers

The Contour CPAP pillow helps sleep more comfortably when wearing a CPAP mask.. More information…

An ecosystem of solutions for individual answers

From diagnostics and healthcare informatics to therapy devices and masks, our solution can help you get a better night’s rest. Crafted to offer both confidence and flexibility, our products allow for a high-quality therapy experience catered to your needs. 

Our device, mask and accessory ranges, together with our online support program myAir™, enable you to easily customise your therapy experience to your preferences.

References

  1. ResMed AirFit N20 internal global fitting study of 159 existing ResMed patients, conducted 12/11/2015; ID A3768073.
  2. ResMed internal study of 24 existing ResMed patients, conducted between 23/11/2015 - 21/12/2015 comparing the market leading mask with AirFit N20; ID A3768073.

Do you still have a question?
Contact us