AirFit™ N30 Support
AirFit™ N30 Support
Patients and Families > Support > AirFit™ N30 Support

Support

Sizing Cushion

  1. Familiarise yourself with the cushion-sizing template provided and the cushion sizes available.
  2. Hold the sizing template under your patient's nose, and use it to help determine the most suitable cushion size. The patient's nose should sit within the colour margins of the chosen size.
  3. Select the matching cushion and try it on your patient for comfort and fit.

* If your patient is in between sizes, we recommend choosing the one with the most suitable width.

Getting started with therapy
Here are some links to help your patients get on the right track with the sleep therapy..

Your therapy basics

The how, what, where and why...

The benefits of therapy

What does therapy do for you..

Think positive

Some helpful tips

Assembly

  1. Ensure you have all the mask components and parts together.
  2. Locate the small buttonholes at each end of the headgear, and insert each stabiliser into each end. Remember to keep the grey side of the headband facing outwards at all times. 
  3. Pull the buttonholes of the headgear over the ends of the stabilisers. 
  4. Hold the mask frame and stretch the headgear away to check it is securely attached. Also ensure that the headgear is not twisted.
  5. Locate the notch on the cushion, and align it with the tab on the top of the frame.
  6. Push down on all edges of the cushion to ensure they are securely sealed.

Fitting

  1. Bring the mask up towards you so that the left and right indicators are correctly aligned with your nose. Once aligned, hold the cushion under your nose with one hand.
  2. Use your other hand to hold the bottom strap of the split band, and pull the headgear over the back of your head.
  3. You can readjust the cushion by pulling it away from your nose and letting it reseal itself.
  4. Adjust the split bands as needed to achieve a comfortable fit. To loosen, spread them apart, and to tighten, bring them together.
  5. To correct mask leak, try adjusting the length of the headgear through the buckle.
  6. Once your mask is secure and comfortable, you can connect the mask tubing and device tubing together and get ready to start therapy.

*Remember to check if the mask is comfortable when you're lying in bed.

Disassembly

  1. Ensure your mask is not connected to your CPAP machine.
  2. Hold the cushion securely on one side, and pull it away from the frame.
  3. Pull on each of the end caps on the headgear until the stabilisers slide out of the buttonhole.
  4. Slide the headgear off the end of the stabiliser.

Getting started with therapy
Here are some links to help your patients get on the right track with the sleep therapy..

Your therapy basics

The how, what, where and why...

The benefits of therapy

What does therapy do for you..

Think positive

Some helpful tips

Daily Cleaning

  1. Follow the mask disassembly instructions to disconnect the mask cushion.
  2. Soak the cushion in warm water and a mild liquid detergent.
  3. Hand wash the cushion inside and out with a soft bristle brush.
  4. Rinse the cushion under running tap water.
  5. Leave the cushion to air dry away from direct sunlight.

Weekly Cleaning

  1. Follow the mask disassembly instructions to disconnect the mask headgear and frame.
  2. Soak the headgear and frame in warm water and a mild liquid detergent.
  3. Hand wash the headgear and frame. When cleaning the frame, you scrub it using a soft bristle brush. Remember to pay attention to cleaning its vent holes. 
  4. Rinse each of the components under running tap water.
  5. Shake off excess water off the frame, and leave each of the cleaned components to air dry away from direct sunlight.

Managing leak

 
If you feel air escaping the mask cushion from any area other than the vent, try the following steps to stop the leak.
 
  1. If the cushion is not sitting correctly, try pulling it away from your nose and letting it reseal itself.
  2. Adjust the mask tension as needed to achieve a secure seal by tightening or loosening the length of the headgear through the buckle. 

*If you still experience mask leak, you should contact your local ResMed representative or clinician. 

Mask Inspection

 
Regular inspection of your mask is essential to ensure it is working correctly. If any damage is found, replace the mask component.
 
  1. Examine the mask system and become familiar with its components.
  2. Follow the user guide instructions to disassemble the mask.
  3. Examine the headgear for signs of wear, tear and damage.
  4. Examine the frame for signs of wear, tear and damage.
  5. Examine the cushion for signs of wear, tear and damage.

Getting started with therapy
Here are some links to help your patients get on the right track with the sleep therapy..

Your therapy basics

The how, what, where and why...

The benefits of therapy

What does therapy do for you..

Think positive

Some helpful tips

Our ecosystem

Individual answers. Collective solutions.

At ResMed, innovation isn’t just an individual idea, it’s an integrated practice. Our innovative products are designed to work together to provide a more powerful solution.