AirFit™ N30i
AirFit™ N30i
Patients and Families > Support > AirFit™ N30i

Support

Sizing frame

  1. If you are male, start with the standard frame size. If you are female, start with the small frame size. 
  2. If you try the standard size first, and the frame sits too close to your ears, size down to the small frame for a better fit. 
  3. If the frame is too large, try the small size frame for a better fit. 
  4. If you try the small frame first and the frame sits too close to your eyes, size up to the standard frame for a better fit. 
  5. If the frame is too small, try the standard size frame for a more comfortable fit.

Assembly

  1. Ensure you have all the mask components and parts together. 
  2. Connect the elbow to the frame. 
  3. Thread the left end of the headgear into the left side of the frame and fasten the tab. 
  4. Thread the right end of the headgear into the right side of the frame and fasten the tab.
  5. Align the arrow on the cushion to the arrow on the frame and connect together. 
  6. Connect the remaining end of the cushion and frame together with the ResMed logo facing the right way up through the headgear.

Fitting

  1. Bring the mask above your head and then down over your face while ensuring the elbow is centred on the top of your head. 
  2. Place the headgear behind your head and the cushion under your nose. 
  3. Adjust the headgear until the mask and cushion are comfortable. 
  4. Disconnect the elbow from the top of the frame and attach it to the air tubing. 
  5. Reconnect the elbow with the air tubing to the top of the frame. 

Disassembly

  1. Ensure your mask is disconnected from your machine. 
  2. Pull the cushion out from one end of the frame.
  3. Pull the cushion out from the other end of the frame. 
  4. Unfasten the headgear tab from one side and pull it out of the frame. 
  5. Unfasten the headgear tab from the other side and pull it out of the frame. 
  6. Squeeze the side buttons on the elbow and pull up to release it from the frame. 

Weekly cleaning

  1. Disassemble the mask into its components as per disassembly instructions.
  2. Soak each of the components (headgear, elbow and frame) in warm water and a mild liquid detergent. 
  3. Clean the elbow and frame with a soft bristle brush and the headgear with your hands. 
  4. Rinse each of the components thoroughly under running tap water. 
  5. Squeeze the headgear and the sleeves on the frame with a clean towel to remove excess water. 
  6. Leave each of the components to air dry away from direct sunlight.

Our ecosystem

Individual answers. Collective solutions.

At ResMed, innovation isn’t just an individual idea, it’s an integrated practice. Our innovative products are designed to work together to deliver a more powerful solution.

Reference

  1. ResMed external 7 days clinical study of existing 24 ResMed and non-ResMed patients, conducted between 21/02/2018 - 12/03/2018. Data on file; ID A4320645.