Welcome to ResMed.com
This area of our site caters to our commercial partners.
A. The AirSense™ 10 Elite, AirSense 10 AutoSet™ and AirSense 10 AutoSet™ for Her therapy devices include CSR detection to provide valuable insight into the continued health of your patients. The algorithm has been designed to identify indications of CSR, which you can monitor through reports generated in ResScan™ to help you quickly and accurately provide patients with the right treatment.
A. EPR™ gently lowers the pressure delivered to you as you exhale – making it easier to breathe out against the air pressure. When EPR is enabled, the delivered pressure will not drop below 4 cm H2O.
A. A full list of icons and their descriptions can be found in your user guide.
A. This ramp setting is designed to make the beginning of therapy more comfortable. It begins by delivering a low start pressure to help you fall asleep with ease. Then, using its sleep onset detection capability, it comfortably starts ramping up to your prescribed pressure the moment it detects you’ve fallen asleep.
A. The Ramp feature on your device is designed to make the beginning of therapy more comfortable. Ramp time is the period during which the therapy pressure increases from a low start pressure to the prescribed treatment pressure. Ramp time can be set between 5 and 45 minutes, or can be switched off. Note: In an auto-adjusting device like the AirSense™ 10 AutoSet, end-of-ramp time is when the auto-adjusting algorithm starts monitoring and responding to your individual breathing patterns.
A. If you require oxygen, you will need to use an oxygen port. ResMed recommends using the Oxygen Connector Port, but an Oxygen Side Port Connector may also be used. Note: An Oxygen Diverter Valve can be set up to reduce oxygen build-up in the device if oxygen continues to flow when the therapy device is on standby, or off. If you're using the Standard or SlimLine™ air tubing, we recommend that you place the oxygen port between the device and the air tubing. If you're using the ClimateLineAir™ heated tubing, then the port will need to be fitted between the tubing and the mask.
A. The material used for the filter is not intended to be cleaned but the filter can be replaced.
A. The device number (DN) is a 3-digit code that can be found on the label at the back of your device. It provides additional security and is similar to a CVV code on the back of a credit card.
A. The serial number (SN) and device number (DN) can be found on the label at the back of your device.